Forced Performance RED Turbo (Internal Wastegate) Subaru 2002-2007 WRX / 2004-2020 STI
Oil supply line and gasket set now included!
- Compressor wheel - HTZ 79
- Flow rating - 65LB per minute
- CW Measurements - 57.3MM Inducer / 79MM Exducer
- TW Measurements - 67.3MM Inducer / 58.8MM Exducer
- Compressor Housing - 84MM FAP Cover
- Turbine Housing - FP 8CM or 10CM Subaru Turbine Housing
- CHRA - FP Journal Bearing
- Oil Line - Included
Redesigned in 2018, the Subaru FP Red has our HTZ 79 compressor wheel in our 84MM Flow Advancement Port™compressor cover to give you the same power as the old Red with massively improved spool and response time.
In the past we have sold two different types of oil lines. They were known as Type 1 or Type 2, and it was too easy to get confused as to the type needed due to various model differences across the years. To solve this problem, we developed a new oil feed line that includes the parts for both Type 1 and Type 2 cars. The installation instructions below will show which parts to use based on which type of car you have, which is why we are still using the Type 1 and 2 designators.
Type 1 - Type 1 instructions are to be used if the oil feed location off the back of the head only feeds the turbo. See the diagram on the right below, if you have that type of oil line you will use the Type 1 instructions. This was formerly known as the non-AVCS line.
Type 2 - Type 2 instructions are to be used if the oil feed location off the head splits and feeds the turbo and the AVCS solenoid. See the diagram on the left below, if you have that type of oil line you will use Type 2 instructions. This was formerly known as the AVCS Line.