Forced Performance GREEN HTZ Turbo (External Wastegate) Subaru 2002-2007 WRX / 2004-2020 STI

by
Sold out
$1,225.00

SKU FP_GREEN HTZ_EWG

Oil Supply Line and gasket set now included!

Subaru Green HTZ

  • Compressor wheel - 76HTZ
  • Flow rating - 61LB per minute
  • CW Measurements - 54.8MM Inducer / 76MM Exducer
  • TW Measurements - 67.3MM Inducer / 58.8MM Exducer
  • Compressor Housing - 60MM Small Inlet or 84MM FAP Cover
  • Turbine Housing - FP 8CM Subaru Turbine Housing
  • CHRA - FP Journal Bearing
  • Oil Line - Included
  • External Wastegate Not Included

The FP Green™ turbocharger for the Subaru WRX/STi features the 76 HTZ™ compressor section with your choice of 60MM small inlet or the 84MM Flow Advancement Port™ compressor cover coupled to the 8cm2 turbine housing. The FP Green™flows 61LB a minute and is capable of producing upwards of 500WHP.

In the past we have sold two different types of oil lines. They were known as Type 1 or Type 2, and it was too easy to get confused as to the type needed due to various model differences across the years. To solve this problem, we developed a new oil feed line that includes the parts for both Type 1 and Type 2 cars. The installation instructions below will show which parts to use based on which type of car you have, which is why we are still using the Type 1 and 2 designators.

Subaru Oil Feed Line Installation Instructions.

Type 1 - Type 1 instructions are to be used if the oil feed location off the back of the head only feeds the turbo. See the diagram on the right below, if you have that type of oil line you will use the Type 1 instructions. This was formerly known as the non-AVCS line.

 

Type 2 - Type 2 instructions are to be used if the oil feed location off the head splits and feeds the turbo and the AVCS solenoid. See the diagram on the left below, if you have that type of oil line you will use Type 2 instructions. This was formerly known as the AVCS Line.

You recently viewed

Clear recently viewed