ATP Turbo Bolt-On GT3076R (External Wastegate) Turbo Subaru 2002-2007 WRX / 2004-2019 STI
Delivery and Shipping
Delivery and Shipping
Add some general information about your delivery and shipping policies.
Description
Description
ATP describes the GT3076R as "the right tool to do 500+ HP job." This turbo can support 500+ horsepower on the 2.5L. While the 3076R has a little more lag than the smaller units (it makes boost about 400RPMs later than the GT3071R), but it makes more top-end power. We do not recommend this turbo for 2.0L cars, unless they are full-race, built-block applications with head work. ATP's WRX & STi GT3076R is the modern "GT30R" and not the sporatically named -10, -11, -12, -13, -14 series from the old days misused and abused as "GT30's". If you're looking for a 500hp turbo for your WRX or STi that is streetable, and has a decent powerband, look no further. The GT3076R has a 60mm turbine wheel with an 84 trim and 76.2mm, 56 trim compressor wheel
| In addition, ATP reccomends a higher flowing 3" turbo inlet, like the Perrin, Agency Power or APS. If you must use a stock-sized inlet, you will need to source a 2.4" to 3" reduction coupler, as the ATP turbos have a 3" inlet.We recommend using a matching-sized 3" inlet for minimal restriction, since GT turbos thrive with minimal inlet obstruction. ATP's tests have shown that these turbos, when used with the stock sized 2.4" inlet, produce significantly less power than when used with the 3" inlet. When coupled with a 3" downpipe, the 3" inlet promotes faster spool, and higher power numbers with less pressure at the manifold. |
| ATP has taken their revolutionary bolt on Subaru turbochargers to the next level by offering a direct fitment external wastegate. The exhaust housing is cast with a flange designed for a Tial 44mm wastegate, while the internal wastagate is eliminated permanently. This setup allows you perfect boost control, and will prevent any boost spiking issues commonly associated with a smaller internal wastegate. |
|
NOTES: 1. Fuel system modifications & ECU tuning a required with these and any other aftermarket turbos. 2. While these turbos will work with a stock-sized inlet, ATP recommends a 3" inlet. 3. Dumptube and Tial 44mm wastegate are sold separately! |
