Brian Crower Stage 3 Cams 2.0L EJ20 Subaru 2002-2005 WRX
Delivery and Shipping
Delivery and Shipping
Add some general information about your delivery and shipping policies.
Brian Crower Stage 3 Cams 2.0L EJ20 Subaru 2002-2005 WRX
Description
Description
The Brian Crower Stage 3 Race Specification Cams for the 02-05 WRX EJ205 and 04-07 STI EJ257 are designed with a longer duration profile and added rpm potential. These Cams are intended for fully built engines with forged internals. Upgraded springs & retainers, tuning and ECU modifications are required to run stage 3 cams.
- Specs:
- Adv. Duration: 280/280
- Duration at .050: 234/234
- Lift: .425/.425(in) 10.80/10.80(mm)
Note: Intake camshafts are setup for AVCS operation. The above cams WILL WORK with AVCS. If running non-AVCS setup is desired, you must install the four set screws (located in a plastic bag attached to the cam bag) in the front of each intake cam (dowel pin side) using a 2.5mm Allen wrench and LocTite. This prevents oil from passing through and actuating the Active Valve Control System. These cams are not compatible with dual AVCS systems.
